Vinyl Flooring a Better Alternative to Parquet Flooring. A Singapore Decision Guide

Parquet was the default flooring for a generation of Singapore homes, and thousands of HDB flats and older condos still have it underfoot. When it dulls, scratches or starts lifting, owners face a three-way decision: polish it back to life, repair the damaged sections, or replace the floor entirely. Each route carries a very different price tag, downtime and long-term outcome.

Goodrich Global does not provide parquet polishing or restoration services. Our range covers herringbone and parquet-look vinyl flooring that delivers the same warm timber patterns without sanding cycles, downtime or moisture worries.

Cycle

Herringbone and parquet-pattern luxury vinyl flooring has become the default choice for owners replacing tired timber, and the logic is straightforward. The wear surface is a clear performance layer over a printed timber design, so there is nothing to sand — the floor never enters a polish-repair-polish loop. It is fully waterproof, which matters in a climate where 80 per cent humidity, wet bathrooms and the occasional aircon leak are what killed the original parquet in the first place.

Installation is fast because vinyl lays over a properly prepared existing floor, often without hacking. A whole flat is typically done in two to four days with no dust extraction, no lacquer odour and no curing window before you move furniture back. Formats now include true herringbone planks in oak, walnut and ash tones, so the classic chevron geometry of old parquet survives even as the material changes. Our herringbone vinyl flooring guide covers laying patterns and plank sizes in detail, and if you are weighing timber against vinyl head-to-head, the comparison in parquet vs vinyl flooring in Singapore sets out the trade-offs honestly.

Underfoot, modern rigid-core vinyl feels firm and quiet rather than plasticky, and the better ranges carry commercial wear ratings that shrug off chairs, trolleys and pets. Browse the wider flooring collection to see plank, tile and herringbone options side by side.

Final Thoughts

The decision tree is simpler than most contractors make it sound. Sound solid parquet with thickness to spare and only surface wear: polish it. Localised lifting or hollow blocks on an otherwise good floor: repair, then polish, and accept some colour mismatch. Worn past its sanding allowance, damaged across multiple rooms, or simply not the look you want: replace — and at that point, parquet-look vinyl delivers the pattern you loved at a comparable installed cost, with none of the recurring restoration bills.

Before committing thousands to a sand-and-recoat, it is worth holding a herringbone vinyl plank against your existing floor and comparing honestly.

Request free herringbone and parquet-look vinyl samples and see how the modern alternative measures up against your existing parquet at home.